AKTERM HydroStop is a single-component acrylic rubber sealant – an acrylic waterproofing mastic, resistant to temperature, UV rays and precipitation. If compare with the other compounds, the roof waterproofing with a liquid rubber has advantages:
- does not require dismantling of old material
- ready for use
- easy to apply with a brush, roller or airless sprayer
- excellent adhesion to a variety of surfaces
- has an elasticity of 650%
- maintains integrity at low temperatures, exposed to sunlight
- resistant to mechanical deformation
- tintable in shades of a typical color scheme.
A liquid acrylic one-component rubber or acrylic waterproofing mastic, made from imported polymers, is capable to form an ultra-strong, elastic and solid coating after full cure, creates an effective and operating waterproofing of the surface and protect against the corrosion.
It is used both outdoors (for waterproofing the roof) and indoors.
A water-based coating, safe and non-toxic.
The coating is applied to any surface: concrete, stone, wood, metal, brick or plastic.
Coverage for 2 coats: from 1 – 2.5 kg/m².
The coverage of acrylic waterproofing mastic depends on surface porosity.
24 hours at a temperature more than + 15 °С and humidity less than 80%.
Apply AKTERM HydroStop coating with a few coats. Porous surfaces are recommended to be pre-treated with an acrylic primer. For the formation of waterproofing coating the ambient temperature must be not lower than +7 °C.
Application Method – Brush, roller or sprayer.
||from +7 °С to +45 °С
||from -50 °С to +130 °С
|Transportation and Storage Temperature
||from +5 °С to +45 °С
|Coverage per 1 m2 with a thickness of 1 mm